Steal back time when fastening on steel

Make the switch to fast, reliable and battery-powered fastening on steel

BX 3-BT extends combustion-free technology to fastening X-BT threaded studs, for a wide variety of grating, bonding and MEP applications.

 

Introducing the BX 3-BT battery-powered fastening tool for fastening X-BT threaded studs to steel

Suitable for a broad range of base materials

Image of steel sheet metal

Steel

Image of stainless steel sheet metal

Stainless steel

Demolation of cast iron

Cast iron

BX 3-BT is combustion-free and entirely powered by your existing Hilti 22V Li-ion batteriesTE 500-A36 uses the B36 battery platform

Combustion-free

Our BX 3-BT is combustion-free and entirely powered by your existing 22V Li-ion batteries.

This means no propellant cartridges to store and dispose, less paperwork and more accessibility for areas where powder tools might be restricted or require hot work permits.

Time savings with the BX 3-BT fastening tool can be huge compared to traditional methods like welding, clamping or through-bolting

Fast and easy

Time savings can be huge compared to traditional methods, like welding, clamping and through-bolting.

Simply drill a small pilot hole, fasten the stud, and check the embedment depth. Drill, fasten, check for fastenings in less than 2 minutes. 

With no residue from powder cartridge “boosters”, the BX 3 is virtually maintenance free.

No cleaning needed

As the BX 3-BT is battery-powered there are no powder cartridge "boosters", and so no powder residue to clean. 

Therefore, you don't need the cleaning kits, sprays, lubricants and other accessories associated with DX tools and welding equipment.

BX 3-BT is a smart tool, connected via the built-in Bluetooth technology and the Hilti Connect App

Smart tools

BX 3-BT joins the growing number of Hilti tools that talk to you. Using the tool’s built-in Bluetooth® technology and the Hilti Connect App, you can track the number of fastenings, watch how-to videos, actively troubleshoot for routine maintenance, and even arrange a service or repair directly on the jobsite.

3D image of the BX 3-BT battery-powered fastening tool for threaded studs

Limitations of traditional methods

Traditional methods for fastening on steel can be complicated, time-consuming and expensive:

  • Welding: can mean grinding the coated steel, employing a certified welder, gaining hot work permits and repainting the area afterwards
  • Through bolting: can mean access to both sides of the steel, time-consuming drilling, and small parts such as nuts, washers and bolts that may get dropped or lost
  • Clamping: can require access to both sides of the steel, high material costs and periodic maintenance if the clamp is exposed to vibration

The Hilti advantage

With Hilti X-BT blunt tip fastening you drive a stainless steel fastener into a pre-drilled hole in the steel. This means you maintain the corrosion protection, as there is no damage to the coating. Simply drill a pilot hole, fasten a stud and check the embedment. Drill, fasten, check for fastenings in less than 2 mins.

Unlike welding or through bolting, you do not need to prepare the base material or rework it afterwards. This makes the installation much faster, while providing reliable corrosion protection. Any trained operator can do the work, you do not need a certified welder. You also do not require access to both sides of the steel, like you do with through bolting or clamping, so no fingers in tight spaces.

Until recently, you could only drive the X-BT with a powder-actuated tool like a DX 351-BT. However, the new BX 3-BT is battery-powered, meaning no storing or disposing of powder cartridges and less hot work restrictions.

Compared to powder-actuated tools, the BX 3-BT is more comfortable to use thanks to lower compression force, noise and recoil. Plus, you can make up to 800 fastenings, with just a full charge of your existing Hilti 22V Li-ion batteries.

Everything you need for fast, reliable and battery-powered fastening on steel

Hilti X-BT threaded stud for fastening on steel

X-BT-MR threaded studs

For reliable fastenings on coated steel, capable of lifting a Hilti truck!

Buy now
X-FCM-R grating fastener disc

X-FCM-R HL grating fastener disc

Use with threaded studs to fastening grating and checker plate in highly corrosive environments.

Buy now
Hilti B3-BT W fastener guide

B3-BT fastener guides

Different fastener guides ideal for multi-purpose, electrical connections, grating and more.

Buy now
Hilti SF-BT 22-A cordless drill for predrilling accurate holes for X-BT threaded studs

SF-BT 22-A cordless drill

Runs on the same 22V battery for predrilling accurate holes for X-BT threaded studs. 

Buy now

HELPING YOU WITH YOUR DAILY BUSINESS

Services to keep you performing

Unforeseen or hidden factors like lost or damaged tools and repair costs can lead to serious productivity issues on the jobsite.

Our service offerings help you avoid these additional costs and keep you working.

Helping you with your daily business

MAKE IT FIT CONFIGURATOR

With so much choice, how can you be sure that you’ve got the right combination of cordless tool, insert and battery? 

Our Make It Fit configurator takes the guesswork out of this daunting task. Starting from an overview of every Hilti cordless tool, this step-by-step filter makes it easy to compare the best options for your business.

Make It Fit lets you choose the tools in your kit

24/7 partner

Whatever the job, wherever you are, our teams are always available to help you get the job done

We have dedicated technical consultants who will meet you directly at the jobsite and offer solutions instantly. Our customer service agents offer advice, take orders, arrange deliveries and repairs all in just one phone call. Get instant access to our products at your nearest Hilti Store, where you can try out our tools and inserts and get further advice.

Dedicated customer service agent just a phone call away