BASIC COURSES

Continuing Education

The course is developed specifically for new design engineers, specification writers, architects and individuals who desires to learn the basic principles of post-installed anchor, fundamentals of passive firestop technology, working principles, and design qualifications referring to both local and international standards.

List of Basic Courses

Post Installed Anchor Technology

A technical seminar that discusses the working principle of anchors, applications, failure modes, types, influencing factors that affect anchor performance, basic design flow per Concrete Design Method, and qualification process that determine their sustainability. The full discussion will consume approximately 90 minutes.

Hilti Anchor Channel System

A technical seminar that discusses anchor channel design, i.e. according to the governing CEN/TS 1992-4-3 design standard, safety factor considerations, and system approvals for qualification. This technical seminar will consume approximately 60 minutes.

Passive Firestop Protection Technology

A technical discussion on the basics of fire, the technologies in building construction that prevent or control it, how passive firestop impede the passage of smoke and flames, qualification process of passive firestop systems in accordance with ASTM and UL, the passive firestopping practice in the construction industry and ways to achieve a good passive firestopping. This technical seminar will consume approximately 60 minutes.

Perimeter Firestopping

A technical discussion on the basics of passive firestop protection with focus on perimeter firestop—working principle, application, and qualification process in accordance with ASTM and UL. This technical seminar will consume 60 minutes.

HST3 Stud Anchor Introduction (Thousand Conditions, One Solution)

A technical discussion on mechanical anchor, its working principle, and its applications in the construction industry. The aim of this seminar is to provide information on how the stud anchor, such as HST3, can help, satisfy, and meet fastening requirments. This technical seminar will consume approximately 60 minutes.

Optimized Anchor and Rebar Design with New Generation Epoxy Mortar

A technical discussion on chemical anchor, its working principle, applications, design codes and standards, and qualification. The aim of this seminar is to provide information on chemical anchor – HIT-RE 500 V3, how it can help, satisfy, and meet all fastening requirements. This technical seminar will consume approximately 60 minutes.